INFICON XTC/3 Thin Film Deposition Controller Communications Library Operating Manual - Manual (Page 63)

1 - 49
IP
N 07
4-
45
4-
P1
B
XTC/3 Communications Library Operating Manual
1.3.2.31 getLower50ProcInfo
int getLower50ProcInfo (XTC3AllData *val, char* ErrMsg, unsigned short *len,
BOOL TCP);
Description
This function is used for downloading process information from the instrument
(XTC/3M only) for process 1 to 50 only, which are:
Š Processes 1 to 50 filled each with (NUM_OF_LAYERS +
XTC3_TITLE_LENGTH + 2) x
50 , i.e., 2 byte length for the number of layers
programmed, 1 byte for each programmed layer, and process names for
Processes 1 to 50
NOTE: See command UB3 and QB3 in the User’s Guide document.
The whole packet amounts to a maximum of XTC3_ALL_SIZE bytes.
Arguments
XTC3AllData* val:
This structure is filled with the instrument parameters as described above,
which amounts to a maximum of XTC3_ALL_SIZE bytes. The variable
m_Length is a 2 byte short that represents the length of data being
marshaled in the array val->m_Data.
char* ErrMsg
unsigned short *len
BOOL TCP