INFICON XTC/3 Thin Film Deposition Controller Communications Library Operating Manual - Manual (Page 25)

1 - 11
IP
N 07
4-
45
4-
P1
B
XTC/3 Communications Library Operating Manual
1.3.2.3 getHelloTwo
int getHelloTwo (XTC3HelloData *val, char* ErrMsg, unsigned short *len, BOOL
TCP);
Description:
This function gets the Structure Number, Compatiblity Number, Range Number,
and Unit Type (XTC/3M vs XTC/3S).
Arguments:
XTC3HelloData *val
This 16 byte structure will hold the 4 integers described above, in that order,
sent by the XTC/3 instrument.
char* ErrMsg
unsigned short *len
BOOL TCP
Example:
#include "XTC3Lib.h"
void main()
{
if(StartSocket()==0)
printf("Socket could not be initialized.");
if(!ConnectSocket("10.211.70.209"))
printf("Socket could not be connected!");
char ErrStr[256];
unsigned short length = 0;
memset(ErrStr,0,256);
XTC3HelloData val;
BOOL TCP = TRUE; // TCP/IP comm.
getHelloTwo (&val, ErrMsg, length, TCP);
if(*ErrStr == 0)
{
printf("Data Transfer successful\n");
printf("Structure Number: %d\n"
"Compatibility Number: %d\n"
" Range Number: %d\n"
" Unit Type: %d\n",
val.m_Data[0], val.m_Data[1], val.m_Data[2],
val.m_Data[3]);
}
else
printf(ErrStr);
CloseSocket();
}