INFICON XTC/3 Thin Film Deposition Controller Communications Library Operating Manual - Manual (Page 59)

1 - 45
IP
N 07
4-
45
4-
P1
B
XTC/3 Communications Library Operating Manual
1.3.2.29 getMinProc
int getMinProc (XTC3AllData *val, char* ErrMsg, unsigned short *len, BOOL
TCP);
Description
This function is used for downloading all the instrument parameters without
process layer lists and process names, which are:
Š General = XTC3_MAX_GEN_PARAM x 4 bytes
Š Film = NUM_OF_FILMS x MAX_FILM_PARAM x 4 bytes
Š IOMap = (NUM_OF_RELAYS + NUM_OF_TTLs +
XTC3_NUM_OF_INPUTS) bytes
Š All Film Names (XTC/3M only): NUM_OF_FILMS x (up to
XTC3_TITLE_LENGTH, null terminator included)
NOTE: See command UB2 and QB2 in the User’s Guide document.
The whole packet amounts to a maximum of XTC3_ALL_SIZE bytes.
Arguments
XTC3AllData* val:
This structure is filled with the instrument parameters as described above,
which amounts to a maximum of XTC3_ALL_SIZE bytes. The variable
m_Length is a 2 byte short that represents the length of data being
marshaled in the array val->m_Data.
char* ErrMsg
unsigned short *len
BOOL TCP