INFICON XTC/3 Thin Film Deposition Controller Communications Library Operating Manual - Manual (Page 48)

1 - 34
IP
N 07
4-
45
4-
P1
B
XTC/3 Communications Library Operating Manual
1.3.2.20 getOutAll
int getOutAll (OutAllData *val, char* ErrMsg, unsigned short *len, BOOL TCP);
Description
There are NUM_OF_RELAYS relays and NUM_OF_TTLs TTLs in the XTC/3
instrument. Each relay and TTL can be programmed to react to a certain event.
This function will fill the OutAllData structure with these events from the XTC/3
instrument. See User’s Guide document for event numbers and description.
Arguments
OutAllData * val:
This structure will contain each relay or TTL event
(XTC3_NUM_OF_OUTPUTS bytes). See User’s Guide document for event
numbers and description.
char* ErrMsg
BOOL TCP
Example
#include "XTC3Lib.h"
void main()
{
if(StartSocket()==0)
printf("Socket could not be initialized.");
if(!ConnectSocket("10.211.70.209"))
printf("Socket could not be connected!");
char ErrStr[256];
memset(ErrStr,0,256);
OutAllData val;
unsigned short len = 0;
getOutAll(&val, ErrStr, &len, TRUE);
if(*ErrStr == 0)
{
printf("Data Transfer successful\n");
printf("Relay Events are:\n");
for(int i = 0; i < NUM_OF_RELAYS; i++)
printf("%d\n",val.m_Data[i]);
printf("TTL Events are:\n");
for(; i < XTC3_NUM_OF_OUTPUTS ; i++)
printf("%d\n",val.m_Data[i]);
}
else
printf(ErrStr);
CloseSocket();
}