INFICON Sensistor Sentrac Hydrogen Leak Detector - Manual (Page 70)

68
ni
n65
e1-a (140
9)
11 Analog input 0-10V Nominal level = [+0.05 ... +9.95] V
Maximum level = [-50 ... +50] V
Input impedance = 22kohm
Input LP-filter fc = 2.9kHz
A/D internal resolution: 10-bit
Not used
12 PLC input EXT0 See note 3) Selectable input function, see
note 6)
13 PLC input EXT2 See note 3) Selectable input function, see
note 6)
14 Audio line out return (GND) GND External Speaker
15 Audio line out AC-coupled
Output is unbalanced
Line_OUT- is connected to GND
Line_OUT+ carries analog audio
symmetrically to GND
Output voltage swing, min = -
1.65V
Output voltage swing, max =
+1.65V
Output impedance = 160ohm @
400Hz
136ohm @ 1kHz
122ohm @ 10kHz
Output LP filter fc = 133kHz
Output External Speaker
16 PLC output EXT0 See note 4) Selectable output function, see
note 5)
17 PLC output EXT1 See note 4) Selectable output function, see
note 5)
18 PLC output EXT2 See note 4) Selectable output function, see
note 5)
19 PLC output EXT3 See note 4) Selectable output function, see
note 5)
20 RS232: DTE ready See note 1) Serial communication
21 GND GND for I/O
22 RS232: Ring indicator See note 1) Serial communication
23 Analog output 0-10V Nominal range = [0.150 ... +10.0]
V
Resolution: 8-bit
Output current = -65mA (sourcing)
/ +100mA (sinking)
Unlimited capacitive load
No short-circuit protection
Linjear output betvieen to
measuring level. Check value
level, Calcualte RL voltage,
calcualte resulution.
No Locating value.
24 GND GND for I/O
25 PLC input EXT1 See note 3) Selectable input function, see
note 6)
Pin Signal Specification Function