INFICON Sensistor Sentrac Hydrogen Leak Detector - Manual (Page 58)

56
ni
n65
e1-a (140
9)
13.2 Hardware Error Messages
Warning Message Indicators
Message in the menu
warnings list Error Code
Alert Probe not connected. Blue LED flashing. (None) (None)
Alert SD-card not inserted. Orange measure
window at screen. (None) (None)
Alert Battery discharged. Recharge
battery. Orange measure
window at screen, fast
Blue LED flashing. (None) (None)
Alert Low sensor signal. Reject level to low for
sensor sensitivity. (None)
Alarm Sensor broken or not connected.
Change sensor or connect
sensor. (Voltage to high, Error
E1) Red measure window
at screen, Blue LED
flashing. Sensor broken or not
connected. (Voltage to
high) 01
Alarm Sensor broken. Change sensor.
(Voltage to Low, Error E2) Red measure window
at screen, Blue LED
flashing. Sensor broken.
(Voltage to Low) 02
Alarm Sensor broken. Change sensor.
(Temperature to Low, Error E3) Red measure window
at screen, Blue LED
flashing. Sensor broken.
(Temperature error) 03
Alarm Probe disconnected. Reconnect
the probe. (Error 04) Red measure window
at screen, Blue LED
flashing. Probe disconnected. 04
Alarm Probe communication problem.
Try restart instrument or change
cable. If the problem remains
contact service. (Error 05) Red measure window
at screen, Blue LED
flashing. Probe communication
problem. 05
Alarm Probe Software not compatible
with instrument. Change probe
or upgrade probe software.
(Error 06) Red measure window
at screen, Blue LED
flashing. Probe Software not
compatible with
instrument. 06
Alarms Two probes connected.
Disconnect probe and restart
instrument. (Error 07) Red measure window
at screen, Blue LED
flashing. Two probes connected. 07
Alarms Instrument hardware error,
service recommended (Error 08) Red measure window
at screen, Blue LED
flashing. Instrument hardware
error. 08
Alarms Probe hardware error, service
recommended. (Error 09) Red measure window
at screen, Blue LED
flashing. Probe hardware error. 09