INFICON Sensistor Sentrac Hydrogen Leak Detector - Manual (Page 64)

62
ni
n65
e1-a (140
9)
14.5 Software Update
1 Download the update software to a computer.
2 Locate the downloaded file. Double click on Setup.exe.
3 An icon will appear on the desktop when the installation is finished.
4 Connect the Sentrac to the computer.
5 Double click on the icon on the desktop.
6 Chose which unit to update, Sentrac or probe.
7 Click download to perform the software update.
8
Restart the instrument after completed update.
Notice If an older version of the software is already installed, it must be removed.
Follow the given directions.
Notice Connect the probe to the instrument if the probe-software is to be
updated.
Notice Check for the code [Instrument Serial no.] in the COM port window. If the
code is present, the communication between the computer and the
Sentrac is set up.