Brother LW6091001 - Manual (Page 75)

71
Resetting the P-touch
1
2
3
4
5
6
7
8
9
z
MAIN
TAININ
G YOUR P-TOUCH
MAINTAINING YOUR P-TOUCH
You can reset the internal memory of your P-touch when you want to clear all saved
label files, or in the event the P-touch is not operating correctly.
Resetting data to factory settings (Downloaded data is not reset.)
Turn off the machine. Press and hold down the Shift and R keys. While holding down the
Shift and R keys, press the Power key once and then release the Shift and R keys.
Resetting data to factory settings (Downloaded data is reset.)
Turn off the machine. Press and hold down the Shift and Backspace keys. While holding
down the Shift and Backspace keys, press the Power key once and then release the Shift
and Backspace keys.
Your P-touch should be cleaned on a regular basis to maintain its performance and life
span.
Cleaning the Unit
Wipe any dust and marks from the main unit using a soft, dry cloth.
Use a slightly dampened cloth on difficult to remove marks.
Resetting the P-touch
• Release the Power key before releasing the other key.
• All text, format settings, option settings and stored label files are cleared when you reset the
P-touch. Language and unit settings will also be cleared
Maintenance
Always remove the batteries and disconnect the AC adapter before cleaning the P-touch.
Do not use paint thinner, benzene, alcohol or any other organic solvent. These may deform the
case or damage the appearance of your P-touch.