Brother LW6091001 - Manual (Page 55)

1
2
3
4
5
6
7
8
9
51
z
EDIT
ING A LA
BEL
Creating a Bar Code Label
Entering Bar Code Data
Press the Setup key to display the Setup menu, select "Bar Code Input" using the
or keys, and then press the OK or Enter key. The Bar Code Input screen
is displayed.
Type in the bar code data. Special characters can be
entered in the bar code when using the CODE39,
CODABAR, CODE128 or GS1-128 (UCC / EAN-128)
protocols. When not using special characters, go to
step 5.
Press the Symbol key. A list of characters available for the current protocol is
displayed.
Select a character using the or key, then press
the OK or Enter key to insert the character in the bar
code data.
Press the OK or Enter key to insert the bar code in the
label.
The bar code is displayed on the text entry screen.
z
Special Character List
z
CODE39 CODABAR
1
• Up to five bar codes can be entered on a label.
• Pressing the Symbol key while holding down the Shift key
will also allow you to go to "Bar Code Input".
2
3
4
5
• Press the Escape key to return to the previous step.
• Refer to the Special Characters List table for a list of all available settings.
Code Special Character Code Special Character
0 0
1 1
2 (SPACE) 2
3 3
4 4
5 5
6