Brother LW6091001 User Manual

Page 78

Text mode
Original mode

TROUBLESHOOTING

What to do when...

The P-touch stops
while printing a label.

• Replace the tape cassette if striped tape is visible, as this

indicates that you have reached the end of the tape.

• Replace all batteries or connect the AC adapter directly to

the P-touch.

The label is not cut
automatically.

Check that the Cut Option setting is not set to Chain or No Cut,
as the tape will not be fed after printing the label. Alternatively,
hold down the Shift key and press the Preview key to feed
and cut the tape.

Label files saved
previously are now
empty.

All files stored in the internal memory are deleted if the
batteries are weak or the AC adapter was disconnected.

Problem

Solution