Brother LW6091001 - Manual (Page 38)

EDITING A LABEL
34
Setting Character Attributes
Setting Auto Fit Style
When "Size" is set to "Auto" and "Length" is set to a specific length, you can select the
way of reducing the text size to fit within the label length.
When "Text Size" is selected, the total text size is modified to fit within the label.
When "Text Width" is selected, the text width will be reduced to the size of x1/2 setting.
(If further size reduction is required to fit the text into the selected label length, the total
text size will be modified after reducing the text width to x1/2 setting.)
Press the Setup key to display the Setup menu, Select "Auto Fit Style" using the
or key, and then press the OK or Enter key.
The Auto Fit Style screen is displayed.
Select the style using the or key.
Press the OK or Enter key to apply the setting.
Align
(Alignment)
Left
Center
Right
Just
(Justify)
Attribute Value Result
1
2
3
• Press the Escape key to return to the previous step.
• Press the Space key to set the style to the default setting ("Text Size").