Inserting a tape cassette – Brother LW6091001 User Manual

Page 22

Text mode
Original mode

Inserting a Tape Cassette

GETTING STARTED

Tape cassettes of 3.5mm, 6mm, 9mm, 12mm, 18mm, or 24mm width can be used in
your P-touch. Use only Brother tape cassettes with the

mark.

Check that the end of the tape is not bent and
that it passes through the tape guide. If the
tape is not passed through, pass it through
the tape guide referring to the illustration.

After making sure that the power is off, lift open the
tape compartment cover. If there is already a tape
cassette in the machine, remove it by pulling it
straight up.

Inserting a Tape Cassette

• If the new tape cassette has a cardboard stopper, be sure to

remove the stopper before inserting the cassette.

• If the ink ribbon is loose, use your finger to wind the toothed

wheel in the direction of the arrow as shown on the tape cassette.

End of tape

Tape guide