Brother LW6091001 - Manual (Page 26)

22 Setting Language and Unit
GETTING STARTED
Back Light
You can change the back light setting either to ON or OFF.
The display is easier to see with the back light ON. The default setting is "ON".
Press the Setup key to display the Setup menu, select "Backlight" using the
or key, and then press the OK or Enter key.
Select "ON" or "OFF" using the or key.
Press the OK or Enter key.
Language
Press the Setup key to display the Setup menu, select "Language" using the or
key, and then press the OK or Enter key.
S elect a language for menu commands and messages shown on the LCD display by
using the or key.
The language can be selected from "Český", "Dansk", "Deutsch", "English", "Español",
"Français", "Hrvatski", "Italiano", "Magyar", "Nederlands", "Norsk", "Polski",
"Português", "Română", "Slovenski", "Slovenský", "Suomi", "Svenska" or "Türkçe".
Press the OK or Enter key.
Unit
Press the Setup key to display the Setup menu, select "Unit" using the or
key, and then press the OK or Enter key.
Select a unit for dimensions shown on the LCD display by using the or key.
Either "mm" or "inch" can be selected.
Press the OK or Enter key.
1
2
3
Power can be saved when the back light is turned off.
Setting Language and Unit
1
2
3
Press the Escape key to return to the previous step.
1
2
3
The default setting is "mm". Press the Escape key to return to the previous step.