GeoDesy FSO GeoData20 series - Manual (Page 52)

52
Longitude
– specify the longitude coordinates of the device [specific decimal format, e.q. 54.869446].
Latitude
– specify the latitude coordinates of the device [specific decimal format, e.q. 23.891058]. Both
coordinates helps indicate accurate location of the device.
Account settings
The Administrative Account menu is for changing the administrator’s password.
Default administrator logon settings are:
Username: admin
Password: admin01
Username
– change the administrator’s username.
Old password
– enter the old administrator password.
New password
– enter the new administrator password for user authentication.
Verify password
– re-enter the new password to verify its accuracy.
The only way to gain access to the web management if you forget the administrator
password is to reset the unit to factory default settings.
System functions
Reboot device
– reboot device with the last saved configuration.
Reset device to factory defaults
– click to restore unit's factory configuration.
Resetting the device is an irreversible process. Current configuration and the administrator
password will be set back to the factory default.
Download troubleshooting file
– click to download the troubleshooting file. The troubleshooting file
contains valuable information about device configuration, routes, log files, command outputs, etc.
When using the troubleshooting file, the device quickly gathers troubleshooting information
automatically, rather than requiring you to gather each piece of information manually. This is helpful
for submitting problems to the support team.
Backup configuration file
– click to save the current configuration file. The saved configuration file is
useful to restore a configuration in case of a device misconfiguration or to upload a standard
configuration to multiple devices without the need to manually configure each device through the web
interface.
Restore configuration from file
– click to upload an existing configuration file to the device.
7.4.2 Log
Use the log tab to configure device to view or save log messages to the local or remote server using
standard syslog facility: