GeoDesy FSO GeoData20 series - Manual (Page 50)

50
Configuration
– choose the system clock configuration mode [NTP/Manual].
Time zone
– select the time zone. Time zone should be specified as a difference between local
time and GMT time.
Save last known time
– select to recall the timestamp that was saved on last reboot. When NTP is
enabled, this option will set system clock to last reboot time if no NTP servers are available.
NTP server
– specify the trusted NTP server IP or hostname for synchronizing time with [IP address].
To adjust the clock settings manually, choose the configuration mode as Manual and specify the
following settings:
Configuration
– choose the system clock configuration mode [NTP/Manual].
Time zone
– select the time zone. Time zone should be specified as a difference between local
time and GMT time.
Save last known time
– select to recall the timestamp that was saved on last reboot.
Date
– specify the new date value in format MM/DD/YYYY
Time
– specify the time in format hh:mm.
7.3.5 SSH
Use this menu to manage access to the device via SSH port:
Enabled
– enable or disable SSH access to device.
Port
– the SSH service port. By default SSH port is 22.
7.3.6 HTTP
Use this menu to control HTTP connection on device web management: