GeoDesy FSO GeoData20 series - Manual (Page 36)

36
WEP encryption can be either 64bit or 128bit:
WEP passkey
– specify the passkey, for the chosen WEP security:
 For WEP 64bit encryption – 5 HEX pairs (e.g. aa:bb:cc:dd:ee), or 5 ASCII characters (e.g.
abcde);
 For WEP 128bit encryption – 13 HEX pairs (e.g. aa:bb:cc:dd:ee:ff:gg:hh:00:11:22:33:44), or 13
ASCII characters (e.g. abcdefghijklm);
Personal WPA/WPA2 encryption must be specified with the pre-shared key, encrypted with chosen
AES or TKIP method (Auto mode on Station is not available):
Passphrase
– specify the WPA or WPA2 passphrase [8-63 characters]. The passphrase will be
converted to key format, selected above.
Encryption
– specify the encryption algorithm:
 AES – passphrase encrypted with AES method.
 TKIP – passphrase encrypted with TKIP method.
APC has possibility to use Enterprise WPA/WPA2 encryption with RADIUS authentication. Station
will send requests to AP, which will redirect authentication parameters to required RADIUS server.
Encryption
– choose WPA/WPA2 encryption type:
 AES – data encrypted with AES method;
 TKIP – data encrypted with TKIP method;
EAP method
– choose EAP method:
 EAP-TTLS-MSCHAPv2