GeoDesy FSO GeoData20 series - Manual (Page 22)

22
tables with information about connected wireless clients will be displayed.
Peer MAC
– displays MAC address of the successfully connected wireless client.
Signal
– indicates the signal strength of the access point main and auxiliary antennas that the station
communicates with displayed dB.
Noise
– displays the noise level in dBm.
IEEE mode
– displays the IEEE mode at which the access point communicates with the particular
station.
Data rate
– displays the data rate at which the access point communicates with the particular station.
Connection time
– displays the duration of the session.
7.1.4 Routes
The Routes page displays the routing table for each interface:
7.1.5 ARP
The ARP page displays the ARP (Address Resolution Protocol) table currently recorded on the
device. Use Refresh button to reload ARP table results.