Gardman Rippling Vase Indoor - Manual (Page 2)

19043 Rippling Vase Indoor Water Feature
www.gardman.co.uk
Water Feature place of purchase (Retailer): Date of Purchase:
Purchase Price:
Care & Cleaning

Clean the feature in a mixture of vinegar and water to remove any mineral build up.

Always turn your water feature off if leaving your home for a sustained period of time.
Troubleshooting
Note: Always switch off and disconnect the plug/transformer from the electrical outlet before handling the
pump.
1) If the pump starts to lose power or fails to operate, check the following;
a) Check if sufficient water is inside the reservoir.
b) Check the pump and tubing for any obstructions.
c) Check the fuse in the plug or try a different power outlet to make sure the pump is receiving electrical
power.
d) Remove the pump inlet cover to access the impeller area. Turn the rotor gently to ensure it is not
broken or jammed (please revert to your separate pump instructions for further information).
2) If the pump gurgles or spews;
a) Check the water level to make sure the pump has enough water to function and ensure the water in the
water reservoir is always at the correct level.
3) If water is splashing outside the fountain or the pump is running with slow water circulation check
the following;
a) Adjust the flow control switch located on the inlet of the pump accordingly for a more suitable flow
rate.
b) Make sure the pump is completely submersed in water.