Gardman Rippling Vase Indoor - Manual

19043 Rippling Vase Indoor Water Feature
www.gardman.co.uk
Water Feature place of purchase (Retailer): Date of Purchase:
Purchase Price:
Please read the assembly instructions and separate pump instructions carefully prior to installation.
Assembly Instructions

Unpack all the water feature components from the packaging and lie on a flat surface.

Take the feature (1) and attach the pump (3) to the rubber tube (2) that is located on the back, and
then lay the pump inside on the base of the feature (4). Make sure the tube is properly connected and
is not kinked.

The pump flow can be adjusted with the switch (5) which is located on the inlet of the pump.

Position the cable through the reservoir opening located (6) on the back of the water feature. Do not
insert the plug (7) in to the mains at this time.

Fill the reservoir with water to 1.5cm (1/2”) from the top. We recommend using warm water to prevent
mineral build up.

Insert the plug/transformer in to the power socket and switch on. If installed correctly water will start
to flow from the feature. Please note: On first use, there may be air in the pump and it may take a few
moments for the water to come through.