Gardman Bubbling Barrel - Manual

19051 Bubbling Barrel Outdoor Water Feature
www.gardman.co.uk
Water Feature place of purchase (Retailer): Date of Purchase:
Purchase Price:
Please read the assembly instructions and separate pump instructions carefully prior to installation.
Assembly Instructions

Unpack all the water feature components from the packaging and lie on a flat surface.

Remove the top section disc (1) of the water feature and attach the pump (3) to the internal rubber
tube (2) that is located on the underside. Lay the pump inside the feature on the base (4) and make
sure the tube is properly connected and is not kinked.

The pump flow can be adjusted by moving the switch (5) which is located on the inlet of the pump.

The plug cable (6) is located on the base of the water feature. Do not insert the plug (7) in to the
mains at this time.

Fill the reservoir with water to 3cm (1 ¼”) from the top of the feature.

Set the top section disc of the water feature back onto the base so it sits level.

Insert the plug/transformer in to the power socket and switch on. If installed correctly water will start
to flow from the feature. Please note: On first use, there may be air in the pump and it may take a few
moments for the water to come through.