Gamber-Johnson 7160-0421 - Manual

INSTALLATION INSTRUCTIONS
Product Revision Form
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Rev C INST-541
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
© copyright 2011 Gamber-Johnson, LLC
Printing Spec: PS-001
7160-0356 - 0-90 CLEVIS WITH 3" ARM
7160-0357 - LOWER CLAM SHELL MOUNT
7160-0363 - EXTENSION TUBE ASSEMBLY
7160-0364 - PILLAR ASSEMBLY, 0-90 CLEVIS
7160-0365 - PILLAR ASSEMBLEY, 0-90 CLEVIS w/ LARGE BACK PLATE
7160-0366 - PILLAR ASSEMBLY, DUAL CLAMSHELL
7160-0367 - PILLAR ASSEMBLY, DUAL CLAMSHELL w/ LARGE BACK PLATE
7160-0368 - ROOF MOUNT WITH CLAM SHELL
7160-0369 - ROOF MOUNT WITH 0-90 CLEVIS
7160-0370 - LOWER CLAM SHELL MOUNT WITH LARGE BACK PLATE
7160-0371 - SECONDARY CLAM SHELL
7160-0420 - DUAL CLAMSHELL w/ 3" ARM & SMALL BACK PLATE
7160-0421 - DUAL CLAMSHELL w/ 3" ARM & LARGE BACK PLATE
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
The following instruction sheet is for the mounting the part numbers listed
above. These mounts are designed to attach to the pillars and roof racks of
various fork trucks.
Mounting the clam shell assembly to the pillar:
7160-0364, 7160-0366, 7160-0420, 7160-0365, 7160-0367 & 7160-0421
The clam shell assemblies attach to the pillar on the fork truck. They can fit a
rectangular pillar from 1 1/2" to 5" wide. The mounts are held in place with
3/8" dia. carriage bolts.
Attach the clam shell assembly to the pillar using the 3/8" carrage bolts and
back plate.
7160-0364, 7160-0366 & 7160-0420 fit tubes 1 1/2" to 2 1/2" wide.
7160-0365, 7160-0367 & 7160-0421 fit tubes 2 1/2" to 5" wide.
The clam shell should be positioned so the top surface of the mount is relatively
level. (See figures 1 & 2.)
1 of 5