Gamber-Johnson 7160-0277 - Manual

INTERFACE PLATE, CF-19
INSTALLATION INSTRUCTIONS
Product Revision Form
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
7160-0277 Rev.B INST-497
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
© copyright 2010 Gamber-Johnson, LLC
Printing Spec: PS-001
The CF-19 Interface Plate allows a Gamber-Johnson CF-19 docking station (7160-0207) to be
attached to the Universal Display Mount (7160-0272, 7160-0273). Refer to the installation
instructions for the Universal Display Mount for additional installation instructions.
Installation:
1. Following the diagram below, install the CF-19 dock to the Universal Display Plate using
the hardware provided.
2. Using the supplied hardware, install the Plate into the slots in the Universal Display Mount.
3. Adjust the computer to the desired height and tighen the four bolts holding the plate in.
4. Finish installation following the installation instructions provided with the CF-19 docking
station.
(4) 1/4-20 x .50
HEX HEAD BOLTS
(4) 1/4-20 x .50
HEX HEAD BOLTS
(4) 1/4-20 x .50
HEX HEAD BOLTS
& WASHERS
(4) HEX STANDOFF/COUPLINGS
INTERFACE PLATE
CF19 DOCK/CRADLE