Gamber-Johnson MCS-1TMRS-CV - Manual

INSTALLATION INSTRUCTIONS
Product Date Form #
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Trunk Mounted Shelf for
Ford Crown Victoria/Police Interceptor
MCS-1TMRS-CV & MCS-2TMRS-CV
Rev. B INST-44
These instructions describe installing a single shelf, trunk mounted radio shelf assembly
(MCS-1TMRS-CV) , or a double shelf, trunk mounted radio shelf assembly (MCS-2TMRS-CV).
Installing Shelf Assembly on Left Side of Trunk
Fig. 1 - Each unit is shipped with the inner half of the
slide attached to the shelf and outer half of the slide
attached to the side brackets.
Fig. 2 - Attach each of the side brackets to
the front bracket with two 8-32 x .38 long
phillips screws and to the back bracket
with two 8-32 x .38 long phillips screws.
FIG. 1
SIDE BRACKET
SIDE BRACKETS WITH OUTER HALF
OF SLIDE ATTACHED
SHELF WITH INNER HALF
OF SLIDE ATTACHED
RELEASE LATCH
BACK BRACKET
8-32 x .38 SCREWS
SIDE BRACKET
FRONT BRACKET
8-32 x .38 SCREWS
FIG. 2
SH 1 OF 4
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.