Gamber-Johnson 7160-0222 - Manual

7160-0222
INSTALLATION INSTRUCTIONS
Product Revision Form
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Base - Chevrolet Malibu 2006+ - No-Drill Rev. B INST-454
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
© copyright 2012 Gamber-Johnson, LLC
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
Trim Panel Removal 2006 - 2009 Vehicles
#1. - Move the passenger seat forward.
Remove the passenger seat adjustment lever.
1 / 4
WARNING
•You must read and follow all of these installation instructions. Failure to follow all of these
installation instructions may result in serious bodily injury or death.
•The installer and user of the Chevrolet Malibu Base are responsible for installing and using
Upper Pole, Motion Attachment and Dock or Cradle assemblies outside the airbag deployment
zone. (See Product Mounting Disclaimer Below)
•Keep these installation instructions with the product and readily available in the vehicle for
future reference of other users of the product.
•Additional copies of the installation instructions can be obtained from Gamber-Johnson.
If you need assistance or have any questions, call Gamber-Johnson at 1-800-456-6868.
•Do not remove warning label from product under any circumstances.
#2. - Remove trim panel fastener on side of the
seat with a T20 torx bit.
Note: 7160-0222 Chevrolet Malibu Base will not work in vehicles with Power Passenger Side Seats.
Power Passenger Side Seats are found on LTZ, 1LZ & 2LZ models.