Gamber-Johnson 7120-0635 - Manual (Page 2)

ASSEMBLY
Install components of conversion kit as shown in Fig. 2. Position Cam Mount Clips facing inward
(shown) or outward based on depth adjustment range (see page 1) needed for computer/tablet.When
completed, cradle should appear as shown in Fig. 3. All screws should be loosely tightened to allow
side-to-side movement of Clip Guides and rotation of Cam Clips.
7120-0635
Use security hardware version of screws for the (3) #8 x .625 screws and (1) #8-32 screw. Sizes are still
the same as indicated
Qty. 2
Spacer
Clip Guide
5/16 External Tooth Lock
#8-32 x .625 SHCS
#8-32 x 1 SHCS
#8 Flat Washer
Qty. 4
Qty. 2
Cam Mount Clip
Washer, Qty. 2
Cam Clip
Qty. 2
Fig. 2
#8 x .625 SHCS
Qty. 3
Fig. 3
2/4