FasTest TwistMate Serie Seal Replacement - Manual (Page 2)

REPLACMENT INSTRUCTIONS
Roseville, MN
Ph: 1-800-444-2373
Fax: 651-645-7390
www.fastestinc.com
WP015 10/6/2010
MALE PLUG
CONNECTOR
MALE EXTENDED
CONNECTOR
MALE SWIVEL
CONNECTOR
PLUG CROSS-SECTION MALE EXTENDEDCROSS-SECTION
MALE SWIVEL CROSS-
SECTION
FACE SEAL
SLEEVE
O-RING BACK-UP RING
SWIVEL BACK-UP
RING
BODY SWIVEL O-RING
RET. RING
FITTING
EXPLODED VIEW OF SWIVEL CONNECTOR
FACE SEALS SOLD
SEPARATELY!
CONNECTOR MAINTENANCE:
• A daily, weekly and periodic inspection of the connector by competent person is
recommended.
• User must establish a regular interval for maintenance as determined by the user media
and operational environment.
• Inspection should include damage to the body missing or loose components, leak
tightness, ease of operation, sufficient lubrication, wear, dirt accumulation and damage.
• Inspect threads for wear.
• Use only original FasTest spare parts that are designed for the application and are subject
to strict quality control. See Warranty.
• Lubricate on regular intervals under normal operating conditions. Lubrication should be
compatible with user application.
FasTest, Inc. Product Warranty
FasTest, Inc. warrants its products against defects of workmanship and/or material for 12 months from the date of the
sale by FasTest, Inc. This warranty is void if the product is misused, tampered with or used in a manner that is not in
accordance with FasTest, Inc. recommendations and/or instructions. FasTest, Inc. is not liable for consequential or
other damages including, but not limited to, loss, damage, personal injury, or any other expense directly or indirectly
arising from the use of or inability to use its products either separately or in combination with other products. ALL
OTHER WARRANTIES EXPRESSED OR IMPLIED, WHETHER ORAL OR WRITTEN, INCLUDING BUT NOT
LIMITED TO
WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
EXCLUDED.
Remedy under this warranty is limited to replacement of the product or an account credit in the amount of the original
selling price, at the option on FasTest, Inc. All allegedly defective products must be returned prepaid transportation to
FasTest, Inc. along with information describing the products performance, unless disposition in the field is authorized
in writing by FasTest, Inc.
MITR Internal Seal Replacement Instructions.
Description: Internal Seal and Back-Up Ring Replacement Instructions for
NPT, JIC and SAE O-Ring Boss Connectors.
Please thoroughly read the following two steps on properly replacing seals and back-up rings on
MIT Connectors.
1. Male Plug and Male Extended Connector Internal Seal Replacement.
2. Male Swivel Connector Internal Seal Replacement.
WARNING: If instructions are not clear or components are missing, contact
factory before using connector.