EZWatch CMS software for TurboView - Manual (Page 23)

23
B, D, E and F Type
4 Channel DVR
8 Channel DVR
16 Channel DVR
3.4 Using a Remote Controller
 Usage of a remote controller is same as the front panel keys.
 Follow the procedure below when using the remote controller for multi DVRs.
① Check System ID (e.g., between 1 and 255) of the DVR that wish to use.
- (SETUP>SYSTEM>Information>Status>System ID).
② Holding up the remote controller to face towards the DVR and press the System ID numbers one by one, while pressing
ID button on the remote controller. Note that the System ID is a 3-digit number. Button ‘10’ functions the same as ‘0’.
- (e.g.: If System ID is 3, press 10>10>3 buttons in sequence while pressing the ID button)
3.5 Using a Mouse
 Mouse provides an easier access to adjustment. Refer to below for proper use.
 Left mouse button functions the same as Enter ( ) key on the front panel of DVR.
 Right mouse button displays the following “Function keys” on screen.
 Click Search menu at “Function Keys” the same as Search key on the front panel of DVR. Press the button, then the Search
menu will appear on screen.
Name of Key Function Name of Key Function
Display Same as front key Event Same as front key (indicate System Log)
Sequence Same as front key Search
One-touch playback (same function with
(PLAY/PAUSE)
Spot Same as front key Setup Same as front key
Zoom Same as front key Emergency Same as front key
Freeze Same as front key Shutdown
Pre-step before Power off
(SETUP>SYSTEM>Shutdown)
PIP Same as front key Cancel Cancel Function key menu
PTZ Same as front key