EZWatch CMS software for TurboView - Manual (Page 124)

124
(NOTE)
This [Serial In] section does not show without additional Serial-in option.
14.5.1 Title
 Click “Title” item then virtual keyboard will appear.
 Input the title then click ( ) to save.
14.5.2 Port Setting
 Press ( ) the “Port Setting” button in order to set up the port. Default values are Baud rate 2400 bps, Data Bit 5 bit, Stop Bit
1 bit, Parity None.
 When the setup is done, press enter ( ) to save the setting.
14.5.3 OSD Display
 OSD items are to decide whether to display the information from the serial port connected to the rs232 port on OSD screen.
 They have 4 menus as followings:
- None : displays nothing on the OSD screen.
- Live : displays incoming information from the serial port in real time on the OSD screen.
- Playback : displays the saved information on the OSD screen during replay.