EUCHNER EKS FSA with Ethernet Interface - Manual (Page 30)

Manual EKS Electronic-Key Adapter Ethernet
7.2 Configuring the Electronic-Key adapter via the web interface
The Electronic-Key adapter can be configured with a web browser.
If you wish to operate the Electronic-Key adapter with a self-defined, fixed IP address, it is recommended to
configure the device with a PC. This is the fastest method, particularly if several devices have to be configured.
The configuration PC must meet the following requirements:
f Network card (10Base-T or 100Base-TX)
f Web browser (e.g. Internet Explorer)
f Java and Java Script must be activated in the security settings of the browser.
f Java Runtime Environment in Version 1.5.0 or higher must be installed.
f If the configuration PC features a firewall, it may be necessary to enable the EKS Electronic-Key adapter as
a trustworthy application. Refer to the firewall documentation for further information.
Launching the EKS web interface
1. Open a browser window and enter the default IP address (http://192.168.1.1) of the EKS Electronic-Key
adapter or the IP address you have assigned. If the EKS Electronic-Key adapter is located in a network with
DHCP server, enter the automatically assigned IP address. You will find this in the network connection
properties under Windows
®
XP.
f The Information screen of the EKS web interface is now displayed.
Page 30/40 Subject to technical modifications 100420-02-01/09