ETC Source Four Revolution with Wybron - Manual (Page 32)

28 Source Four Revolution User Manual
Gel Strings
You can change the gel string in your fixture. Replacement strings must have a minimum
of 4 frames or a maximum of 24 frames of gel media. If you are going to make or purchase
your own gel strings, follow the specifications below to ensure proper performance.
Removing the scroller:
Step 1: Loosen the scroller retainer knobs on both sides of the scroller. These knobs do
not need to be completely removed.
Step 2: Pull the latch on top of the scroller cartridge forward and then lift the scroller
straight up out of the head. The gel string is held in tension and may roll back
after being released from the head.
Removing the accessory plate:
Step 1: Place the scroller face up on a flat surface.
Step 2: Push the scroller latch backward so that it clears the accessory plate.
Step 3: Slide the accessory plate out of the scroller.
25.4 (1.0)
216 (8.5)
203.2 (8.0)
12.7 (.5)
38.1 (1.5)
22.2 (.875)
12.7 (.50)
171.5
(6.75)
216 (8.5) 216 (8.5)
216 (8.5) 216 (8.5)
Color
Frame #1
Trailer Leader
Optically clear
adhesive tape to
join frames and
leader or trailer
±.79 (±1/32) tolerance per color
frame and trailer and leader
2.54 Maximum runout for
4 to 24 gel frame lengths
Long Tag
Short Tag
End Color
Frame
Dimensions shown
in mm (inches)
Gel string shown
face up