Cleaning the reflector – ETC Source Four XT HID Zoom User Manual User Manual

Page 17

Cleaning the reflector

To quickly clean the reflector, remove the lens tube and clean the dust from the reflector with a blast

of oil-free air. You may also wipe the reflector with a clean lint-free cloth. If either method is not

sufficient, follow these steps. Refer to

Step 1:

To protect the lamp during cleaning, remove the lamp assembly. Refer to

Step 2:

Remove the barrel.

Refer to

Step 3:

Remove dust with a blast of oil-free air or wipe with a clean, lint-free cloth. Isopropyl

alcohol, distilled water or a 50%-50% mixture of each can be used to clean the glass

surface.

Step 4:

Gently wipe the reflector.

Step 5:

Reinstall the barrel.

Step 6:

Reinstall the lamp assembly.

W A R N I N G :

Disconnect power and allow the lamp to cool down before attempting to

clean the reflector.