beautypg.com

Adjusting the angle – ETC Source Four XT HID Zoom User Manual User Manual

Page 15

background image

13

Adjusting the Angle

The Source Four XT provides the capability to adjust the fixture angle.

The standard yoke provides +12 to -7° horizontal tilt when ground-mounted.

The standard yoke provides +45 to -40° when bracket or pole mounted.

The optional long yoke allows +90 to -35° fixture angle, including straight up or down
aiming.

Figure-12 Yoke Locking Screw.

Step 1:

Using an 8mm hex wrench, loosen the two yoke locking screws.

Do not remove them.

Step 2:

Tilt the fixture to the desired position.

Step 3:

Tighten the two yoke locking screws to secure in position.

Yoke locking screw