ETC Eos Family Show Control - Manual (Page 27)

String Interface 25
Press the {Execute} softkey.
• [Cue] [1] {Execute}
New softkeys will appear, press the {Strings} softkey.
• [Cue] [1] {Execute} {Strings}
Define the serial string, in this case we will trigger a Macro On in Paradigm.
• [Cue] [1] {Execute} {Strings} macro on Lights1 [Enter]
Sending from Macros
A {Send String} softkey is available in the Macro Editor display. Any text entered after the string
command in the macro will be sent to all enabled string interfaces when that macro is fired.
Sending from User Events
{String MIDI TX} is an option in [Setup]>{Show}>{Show Control}. See “{String MIDI TX}” on
page 6. When {String MIDI TX} is enable, MIDI Show Control messages will be sent as serial string
messages when certain actions happen at the console. Those actions are:
• A cue is fired.
• A cue is stopped.
• A cue is resumed.
• A sub is bumped up.
• A sub is bumped down.
• A macro is fired.
N o t e : String MIDI Tx is restricted by {MIDI Cue List} in Setup. See “{MIDI Cue List}” on
page 6.