ElmoMC SimplIQ Digital Servo Drives-Whi-Trio Installation Guide - Manual (Page 59)

12 Red
13 White-Black
pair
14 White-Red
Figure A-7: Single-sided I/O Cable (Part No. CBL-HDRIO-001)
.33 Communication Cables
The communication cables use 26-AWG twisted pair shielded cable. They are connected
using an 8-pin RJ-45 plug. Elmo drives can communicate using the following options:

RS-232 full duplex
 CANopen
.33.1 RS-232 Option (CBL-RJ452321)
RJ45
Pin
No. Color
D-type
Female
Pin No. Signal Description
3 Brown 2 Tx RS-232 transmit
1
5 White 5 COMRET
Communication
return
6 Green 3 Rx RS-232 receive
body Drain
Wire
body shield cable shield
The shields of the RJ-45 and D-type plugs are connected to each other through the
cable braid.