ElmoMC SimplIQ Digital Servo Drives-Whi-Trio Installation Guide - Manual (Page 56)

.29 Cable Kits
The cables are all 2 m in length. Each set contains the cables listed below. Additional cable
kits and individual cables (individually or in multiples of 10 each) are available from Elmo.
Cable Application Cable Part. No. QTY
Main Feedback CBL-HDRFB-001 3
Pulse and Direction CBL-HDRPD-001 3
I/O CBL-HDRIO-001 3
RS-232 Communications CBL-RJ452321 1
CAN Communications CBL-RJ45CAN1 1
.30 Main Feedback Cable (CBL-HDRFB-001)
The Main Feedback cable (CBL-HDRFB-001) is made of a 24-AWG shielded cable with a
12-pin Molex Header socket. It connects to the FEEDBACK port on the Trio. It is open on its
other side so that it can be connected to customer-specific controller connectors.
Pin
No. Color Pairs
1 Brown
pair
2 White
3 Cyan
pair
4 Orange
5
Purple
pair
6
Black
7 Red
pair
8 Blue
9 Green
pair
10 Yellow
11 Pink
pair
12 Drain wire
12 pin Molex Header Socket