ElmoMC SimplIQ Digital Servo Drives-Whi-Trio Installation Guide - Manual (Page 13)

Installation
.4 Site Requirements
You can guarantee the safe operation of the Trio by ensuring that it is installed in an
appropriate environment.
Feature Value
Ambient operating temperature 0 °C to 40 °C (32 °F to 104 °F)
Maximum operating altitude 2,000 m (6562 feet)
Maximum relative humidity 90% non-condensing
Operating area atmosphere No flammable gases or vapors permitted in area
Models for extended environmental conditions are available.
The Whistle on the Trio dissipates its heat by convection. The maximum
operating ambient temperature of 0 °C to 40 °C (32 °F to 104 °F) must not be
exceeded. Refer to the Heat Dissipation section of the Whistle Installation Guide
for more information.
.5 Unpacking the Drive Components
Before you begin working with the Trio, verify that you have all of its components, as follows:

The Trio.
 The Composer software and software manual.
The Trio is shipped in a cardboard box with Styrofoam protection.
To unpack the Trio:
1. Carefully remove the Trio from the box and the Styrofoam.
2. Check the Trio to ensure that there is no visible damage to the instrument. If any damage
has occurred, report it immediately to the carrier that delivered your Trio.
3. To ensure that the Trio you have unpacked is the appropriate type for your requirements,
locate the part number sticker on the side of the Trio. It looks like this:
4.