Elkhart Brass 70133000 Electric Valves - Manual (Page 4)

4
I PRODUCT SAFETY
Important: Before installing and operating this equipment, read and study this manual
thoroughly. Proper installation is essential to safe operation. In addition, the following points should
be adhered to in order to ensure the safety of equipment and personnel:
WARNING: The actuator must be electrically isolated prior to performing any disassembly or
reassembly.
WARNING: The electronic parts of the actuator can be damaged by a discharge of static
electricity. Before you start, touch a grounded metal surface to discharge any static electricity.
WARNING: It is assumed that the installation, calibration, commissioning, maintenance, and
repair of the actuator is carried out by a qualified and experienced personnel.
WARNING: Repair work, other than operations outlined in this manual, is strictly reserved to
qualified Tyco Valves & Controls personnel or authorized by the Company itself.
SYSTEM INFORMATION
SERIAL NUMBER:______________________________
DETAILS:_________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________
MANUFACTURER
Manufactured to comply with Machinery Directive 98/37: BIFFI ITALIA as specified on the motor label.
INTENDED USE
The Keystone EPI2 electric actuators covered in this manual are designed to automate quarter-turn industrial
valves (ball, butterfly, plug, and control valves) or dampers.
Tyco Valves and Controls is not liable for possible damage or physical injury resulting from the misuse or
improper installation, operation, adjustment, and maintenance of the actuator. Those risks lie entirely with the
user. Additional precautions may be required for certain applications.
As Tyco Valves and Controls has no direct control over particular applications, operation or maintenance
conditions, it is the operator’s responsibility to comply with all applicable safety rules.