DIGIWEIGH DW-PRT24T - Manual (Page 15)

·
Height
Changes the height of the graphic. If Constrain Proportions is checked, Width is also
automatically updated.
·
Rotation
Rotates the graphic at 90, 180 and 270 degrees.
·
Constrain Proportions
Determines whether the width/height ratio must be preserved. If checked, changes in the
width will automatically update the height value, and vice-versa.
·
50% Threshold
Check to use a simple conversion procedure. This is a simple check per dot for 50 %
brightness – if higher, the dot becomes white, if lower – black. In some cases this
procedure is a more suitable conversion method.
·
Brightness
Changes the brightness of the black-and-white image.
·
Contrast
Changes the contrast of the black-and-white image.
·
Color Settings
The Red, Green and Blue color channels allow you to modify the color image in a way
that will affect the black-and-white image.
True Type to Label Printer Font Converter
From this window you can create a matrix font for the label, on the base of some of the
installed TrueType fonts.
The loadable fonts for the DW-PRT24T printers can consist of an arbitrary number of
symbols that may not be successive. Since the printer’s memory is limited, it is preferable
if the font contains only the symbols you will need. Working with loadable fonts is the
same as with the in-built fonts – they can be rotated and multiplied by an integer along
the X and Y coordinate independently. The only difference is that they cannot be printed
in Bold or Inverse style. They are also proportional – i.e. each symbol has a different
width (for example ‘w’ is wider that ‘i’) and it is difficult to assume what the width of the
whole text will be.
·
Font
Use the drop-down menu to select a font to use.