Det-Tronics GP16XX Standard Gas Panel - Manual (Page 7)

1.1 95-8671 5
operator interFace
The HMI touch screen is located on the front of the
enclosure door, and consists of several graphical
screens that permit the setup, operation, and
interrogation of the connected field devices. These
screens include the Main screen, Setup screen, Device
Setup screen, and Event Log screen.
MAIN SCREEN
The Main screen displays the overall status of the devices
within the GP16XX gas panel. The vertical gauges
represent the 16 available channels (Figure 4), and each
channel can inherit any of the following characteristics:
Solid Blue Channel —Channel not active.
Solid Black Channel —Device active with zero gas.
Solid White Channel —Gas is present below alarm
setpoint.
Solid yellow Channel —System fault detected.
Flashing Red Channel —Gas is present above low alarm
setpoint.
Solid Red Channel —Gas is present above high alarm
setpoint.
A Logic Defined tagname and a Custom Device ID
tagname will appear above a channel after setup has
been completed for that channel.
Note
the Logic Defined tagname, beginning with
"GD–", cannot be altered. It is a tagname that
references each channel as a "Gas Detector"
and is used for identifying devices in the event
logs. Custom Device IDs are entered in the
setup screen.
Figure 3—LON Wiring Terminal
CUSTOM
DEVCE ID
REAL TIME
GAS VALUE ACTIVE
CHANNEL
LOGIC DEFINED
TAGNAME
EMPTY
CHANNEL
Figure 4—Main Screen