DATOptic uNAS – tNAS - Manual (Page 44)

uNAS/tNAS User Guide Version 1.0 Page 44
To establish a connection, the FTP client needs several pieces of data: IP address:
192.168.0.220 (this is the standard address) Port: 21 User: anonymous Password: 123. The
allocation of access rights is done via the IP address of the PC currently in the process of
accessing. A read access is, therefore, granted with these generally typical and anonymous
login data. As a standard, server for FTP uses port 21, which can be changed in the
configuration menu (If you use the Internet Explorer when accessing, you need to enter the
following data into the entry line: ftp://192.168.0.220. You are not prompted to enter the user
name and password, as the Internet Explorer first establishes as an anonymous connection. If
you changed the FTP port, add this information to the entry line the following way:
ftp://192.168.0.220:4711 (in this example, 4711 represents the new port number). In order to
grant specific computers write access to the FTP area, enter the desired IP addresses into the
line "IP address complete access"
Function: AppleTalk (AFP) Settings
Here you may activate the AppleTalk protocol in the network to access shares on the NAS
Server.
How to use AppleTalk with the NAS server:
• In the setup -> NAS server enable AppleTalk,
• In setup ->NAS resources menu select a share that you want to be shared with AppleTalk,
• Enable AppleTalk for this share.
Function: SMB settings