3 webpanel, 1 introduction, 2 web browser – Dascom 2600 User Guide User Manual
Page 64: Tally dascom 2610

Tally Dascom 2610
51
6.3 WebPanel
6.3.1 Introduction
WebPanel is an intuitive browser interface that allows you to remotely manage your network
attached printer. From WebPanel, you can do virtually everything you can do from the printer's
control panel.
In addition, WebPanel provides full access to all of the TallyCom networking features. Before
using WebPanel, you must configure your printer with an IP address, using one of the three
methods discussed in the Assigning the IP Address section above.
The screenshots that are used in this document to demonstrate the functionality
may vary depending on the printer model.
6.3.2 Web Browser
WebPanel is accessed from the printer through a web browser, i.e.Internet Explorer, Firefox,
etc. The browser needs to be configured with cache and history empty, and the browser set
up to check for new pages every time, to insure that connections to WebPanel will produce
the latest data.
WebPanel does not work through a proxy server. Therefore, the web browser must be setup
to NOT use the Proxy Server for local IP addresses.
Disclaimer: Dascom WebPanel runs in conjunction with third party software, notably web
browsers, which are designed to run independently of the Dascom software. Dascom cannot
control the third party output or how it behaves from release to release. The above browser
versions have been tested with WebPanel and while there is full functionality, there
will undoubtedly be visual differences and anomalies between products and versions with
which Dascom has no control.