Dascom 2600 User Guide - Manual (Page 41)

Tally Dascom 2610
28
5.1.3 Settings within Menu
Below example demonstrates how to select an Emulation within the Menu.
1) First load fanfold paper to one of the tractor and bring the printer Offline. Pressing
【 Load/Eject】and【Speed】keys simultaneously activates the parameters setting
operation. The printer prints out 2 lines of key assignments valid for the parameter setting
operation.
Key 1 Key 2 Key 3 Key 4
Menu Adjust Char
2) Press【Online】(i.e. Key 1) to get into Menu operation. The printer prints:
Back Print Menu Next
3) Press【Tear】(i.e. Key 4) repeatedly till “Emulation” appears on the printout:
Back ESCChar Emulation Next
4) Press【Speed】(i.e. Key 3) to get into emulation configuration. The printer prints:
Epson LQ-2550 * Set < > Exit
5) Epson LQ-2550 * indicates the current emulation is LQ-2550. Set means to save the
change. < selects the previous item. > selects the next item. Exit leaves the menu. Press
【
Speed】(i.e. Key 3) to show the next emulation:
Epson LQ-2170 Set < > Exit
6) Press 【Online】 (i.e. Key 1) to save the selection of Epson LQ-2170 emulation. The printer
sounds the buzzer and prints the below line to confirm successful change.
Epson LQ-2170 * Set < > Exit
See 5.4.1 for a full list of valid settings.