Dascom T5040 User Guide - Manual (Page 90)

Care and maintenance User Guide
82
Transport of the printer
Preparations for trans-
port If you intend to transport the printer over a short distance only, ensure
that it has been switched off correctly.
Never remove the mains plug when you can still hear mechani-
cal noise.
Make sure that the printer is transported horizontally. Don’t tilt the
printer nor put it upside down. Keep the packaging for future transpor-
tation.
Shipping the printer When shipping the printer, the printer and its accessories must be pro-
perly packed. If your carton or packing material is lost, contact your
dealer or service representative.
Properly packing the printer requires all the original packing
materials.
1.
Turn off the power switches of the printer and the host computer.
Disconnect the power cord from the printer.
2.
Disconnect the interface cable.
3.
Remove the ribbon cassette (refer to section
Removing the ribbon
cassette
, page 35).
4.
Pack the printer and accessories in the shipping carton (refer to
section
Unpacking the printer
, page 5).
STOP