Dascom T5040 User Guide - Manual (Page 67)

User Guide Menu
59
Menu parameters The following section introduces and explains all the possible menu
settings. The default setting is marked by an asterisk (*)
Parameter group Parameter Possible settings Description
MENU
COMMON Default Set Off *
All
Menu 1
Menu 2
Sets all parameters to the default settings.
Menu 1 sets all parameters of Menu 1 to the
default settings.
Menu 2 sets all parameters of Menu 2 to the
default settings.
Copy Menu Menu1 to Menu2 *
Menu2 to Menu1
Copies the settings of Menu 1 to Menu 2 and
vice versa.
Change Menu Menu1 *
Menu2
Defines if the parameter settings of Menu 1 or
of Menu 2 are changed.
Language English *
German
French
Spanish
Italian
Turkish
Selects the display language.
Share User Auto *
Manual
1)
Selects the method to share this printer with
multiple users.
Auto: Printer handles print jobs for USER1 and
USER2 automatically.
Manual: After receiving a print job for USER1
or USER2 the respective USER1 or USER2
key must be pressed to start the printout.
Time to Idle 1 sec *
10 sec
30 sec
60 sec
Selects the time in seconds to return to idle
state after completion of all jobs and ejecting
paper in order to change to another user in
case of Auto mode.
NOTE: This parameter is only displayed if
under Share User the setting Auto has been
selected.
MENU
CHARACTER Character Pitch 10 CPI *
12 CPI
15 CPI
17 CPI
20 CPI
24 CPI
Proportional
Sets the characters per inch (character pitch).
The higher the parameter the smaller the cha-
racter spacing.
If Proportional is selected, only the actually
required space for the character width is used.
1) Only in Epson and IBM emulation
2) Only if MSR-H is installed
3) Only for printer model with second serial interface