Key functions in menu mode, User1 key, User2 key – Dascom T5040 User Guide User Manual
Page 37: Stop/eject key, Menu common, Default set menu1
User Guide
Control panel
29
Key functions in
menu mode
In menu mode the control panel keys have the following functions
USER1 key
The USER1 key is used to go to the next pa-
rameter group or next parameter on the same
menu level (symbolized by an arrow pointing
upwards).
It is also used to change parameter settings.
For further details refer to the section
USER2 key
The USER2 key is used to go to the next pa-
rameter group or next parameter on the same
menu level (symbolized by an arrow pointing
downwards).
It is also used to change parameter settings.
For further details refer to the section
STOP/EJECT key
In menu mode the STOP/EJECT key has the following functions:
The STOP/EJECT key is used to select the
next menu level (e.g. MENU USER > De-
fault Set User 1), to open a parameter item
for changing and to confirm changed parame-
ter items.
For further details refer to the section
MENU
COMMON
SETUP
USER1 STOP
/EJECT
USER2
PAPER
MENU
COMMON
SETUP
PAPER
USER1 STOP
/EJECT
USER2
MENU
COMMON
SETUP
PAPER
USER1 STOP
/EJECT
USER2
SETUP
PAPER
Default Set
Menu1
*
USER1 STOP
/EJECT
USER2