Dascom T5040 User Guide - Manual (Page 20)

Printer drivers and firmware User Guide
12
in one of two possible ways:
` Manual installation of printer driver: in this case, continue with
Step 7.
` Automatic installation of printer driver via Plug & Play function: in
this case, continue with Step 12 once the printer installation wizard
has determined the printer, port and printer name.
Then click on Next.
7.
Select the port to which your printer is connected, then click on
Next.
8.
Click on Data Carrier, then click on Browse.
9.
Select the CD-ROM drive and open the directory n:\driver (“n“
stands for the letter of your PC drive).
10.
Open the folder 32Bit or 64Bit.
11.
Select the printer type and then click on Next.
12.
If required, edit the name of the default printer and specify whe-
ther you wish to use the printer as a default printer by clicking on
the relevant option. Then click on Next.
13.
If you are using the printer as a network printer, you have the
option of sharing it with other network users. In this case you must
enter an access name which will be displayed to the other network
users.
Then click on Next.
14.
Specify whether you wish to print out a test page (recommended)
by selecting the relevant option and click on Finish. The printer
driver will now be installed.