Dakota Ultrasonics DFX-7 plus MANUAL2 - Manual (Page 62)

Dakota Ultrasonics
58
being tested. Use these values only if a close approximation is acceptable. Follow
the steps below to select a basic material type:
Selecting a Basic Material Type
1) Press the MENU key once to activate the menu items tab. Press the MENU
key multiple times to tab right and the ESC key multiple times to tab left until
the CAL menu is highlighted and displaying the submenu items.
2) Use the UP and DOWN arrow keys to scroll through the sub menu items
until MAT is highlighted.
3) Press the ENTER key to display the list of material types.