Dakota Ultrasonics DFX-7 plus MANUAL2 - Manual (Page 26)

Dakota Ultrasonics
22
1) Press the ENTER key to display the digits edit box.
2) Press the UP and DOWN arrow keys to scroll the highlighted value.
3) Press the LEFT and RIGHT arrow keys to scroll the digit locations.
4) Repeat steps 3 & 4 until the DELAY (START) or RANGE (DEPTH) value is
correctly displayed.
5) Press the OK key to set the DELAY (START) and WIDTH (DEPTH) value
and return to the measure screen, or ESC to cancel entering the DELAY
(START) or WIDTH (DEPTH) value.
6) Finally, press the MEAS key to return to the measurement screen and begin
taking readings.
Note: The DELAY (START) & WIDTH (DEPTH) can also be adjusted from the
tabbed menu item DISP. However, using the hot menu keys is the easiest
method.