Dakota Ultrasonics DFX-7 plus MANUAL2 - Manual (Page 37)

DFX-7
Ultrasonic Thickness Gauge
33
3.15 OK Key
The primary function of the OK key is confirmation of a change or selection. The OK
key also toggles the Hot Menu area, while in measurement mode, to a large digits
display area. If the DFX-7 is displaying a grid log, the OK key toggles an advance to
row number option.
3.16 ESC Key
The ESC key is used in the MENU, MEAS, and EDIT functions as a back or escape
function. If the DFX-7 is displaying a grid or sequential log, the OK key toggles the
display options: Digits, RF, RECT, and B-Scan views.
3.17 Arrow Keys
The Arrow Keys are used to navigate through the menus, increase/decrease values,
and toggle specific function keys.
3.18 ENTER key
The ENTER key is used in the overall menu selection process, to activate list and
edit boxes, display and save measurements to grid or sequential files locations.
3.19 MULTI MODE Key
The MULTI MODE key opens a measurement mode screen, listing all the modes that
are available to the transducer selected, or automatically detected. The modes can
be all or a combination of the entire set of modes the DFX-7 offers, depending on
which transducer is being used as follows: Coating Off (P-E), Coating On (PECT),
Temp Comp (PETP), Thru Coat (E-E), Thru Coat Verify (E-EV), and Coating Only
(CT).