Dakota Ultrasonics DFX-7 plus MANUAL2 - Manual (Page 136)

Dakota Ultrasonics
132
9) Use the CLR key to backspace if necessary.
10) Repeat steps 6 - 9 until the Grid or Seq Name (File Name) is completed.
11) Press the OK key to save the Grid or Seq Name and return to the Grid or
Seq List Items menu, or ESC to cancel entering the Grid or Seq Name
(File Name).
Creating a Note
Grid/Seq Log Note: Can contain a combination of up to 20 numeric, alpha, or
special characters listed in the first section of this chapter.
Grid Log Sequential Log
1) Assuming the Grid or Seq List Items are displayed, use the UP and DOWN
arrow keys to scroll through the new Grid or Seq List Items until NOTE is
highlighted.
2) Press the ENTER key to activate the Alpha Edit Box.